Ⅰ. 版本历史 (History)

版本(Version)	日期(Date)	说明(Remarks)	修订人
v1.0	2020-11-22	创建文档	Albert
v2.0	2020-11-29	新增主要内容	Albert
v3.0	2021-05-18	新增vial使用说明 Added instruction fo Vial	Albert

Ⅱ. 包装清单 (Package list)

包装清单 (Package list)
名称 (Name)			数量 (Quantity)	说明(Instruction)
主要组件	键盘外壳 (Main case)	1	-
		铝合金定位板 (Alu plate)	1	-
		主PCB (Main PCB)	1	-
		①灯件(led accessories )	1	-
		②主控 (Microcontroller)	1	-
		③正面灯板 (Main Led PCB)	1	-
		⑤3pin JST线 (3 pin JST cable)	1	连接底部灯板(Using for bottom led pcb)
		⑥4pin JST线 (4 pin JST cable)	1	连接正面灯板(Using for the main led pcb)
		⑦m23螺丝 (m23 screws)	5	4个用于正面灯板，1个用于主控(4 for the main led, 1 for the micro controller)
额外配件	④额外的外壳螺丝 (Extra cae screws)	5	黑色螺丝(black screws)
		⑧额外的定位板螺丝 (Extra plate scre	2	-
		⑨额外的脚垫 (Extra feet)	6	-

正面灯孔是灯板顶住的，可能会有些许下沉，设计即为如此；The front LED accessories are supported by the light board, which may sink. That is a design element

正面灯孔的朝向没有固定方向，请按自己喜好调整；The front LED accessory has no fixed direction, please adjust it according to your preference;

灯板的链接请参考下边的IV-4；For the connection of the light board, please refer to IV-4 below;

配件盒里的黑色外壳螺丝为替换螺丝，请按自己喜好选择；The black case screws in the accessory box are spare screws, please choose according to your preference;

0层即为常用的这一层配列，按住0层中的MO(1)键，切换到1层；(Layer 0 is firstly/mainly layer you are using it, and switch to layer 1 while held the 'FN' key.)

名称 (Name)	说明 (Instructions)	备注
RGB Toggle	灯板开关 (Turn on/off the led)
RGB Mode+	RGB模式切换 (Switch the led RGB mode)
Hue+	增加色相
Hue-	减少色相
Sat+	增加饱和度
Sat-	减少饱和度
Bright+	亮度增加
Bright-	亮度减少
Play	播放/暂停
Vol+	增大音量
Vol-	减少音量
Previous	前一首
Next	后一首

Vial使用类似Via，是一个实时改键软件

进入https://get.vial.today，下载Vial软件安装包，直接打开开始使用；Go their website https://get.vial.today, download the Vial, try it directly.

如果无法识别的话，把下边这个固件按着方式二刷入你的键盘中；If its not working, according to the method 2, flash the following firmware into your keyboard;

下载Vial固件 Download the Vial firmare:

固件制作网站 (firmware website)：http://iatkb.com/

操作步骤(Steps)：

打开网站后，键盘选择abelx，Layout根据你想组的配列选择ANSI或ISO；Open the webist. Find your keyboard and choose the layout you want.

通过键位图左侧选择要修改的层数，默认使用的是第0层；You can switch the layer by using the left tab. The defauly one is layer 0.

修改键位，使用下方的预设键位点击修改，如果没有默认键位，可以通过上传默认键位图增加（点击Keymap.json按钮左边的上传按钮，上传以.json结尾的文件）You can use the preset keys below to modify your firmware. If there is no default keymap, you can update the file by yourself (Click the upload button on the left of the Keymap.json button to upload a file ending in .json).

不同tab里边有不同类型的键位，鼠标再划过预设键位时窗口最下方会有键位说明；There are different types of keys in different tabs. When the mouse passes over the preset key positions, there will be a description at the bottom of the window;

确认之后点击右上角的Compile按钮，等待加载完成（会有一个土豆的图片，等他消失）；Click the 'Compile' button and wait until it done.

加载完成后，右下角的Firmware按钮会变为可用状态，点击即为下载键盘固件（.hex或。bin结尾的文件）；After the compile finished, you can download the firmware by clicking the 'Firmware' button. (The file end in .hex or .bin)

如果想要保存已经修改好的键位图以备下次的时候方便使用，可以点击Keymap.json按钮右边的下载按钮下载保存；You can save your keymap by download the keymap file. Click the ri

使用进入刷机模式快捷键（Reset）或按住ESC插数据线进入刷机模式，一个叫Boot的U盘会出现在你的电脑上，将固件复制进去会键盘会自动刷新，即刷机完成。Using 'Reset' key or plug in the cable while hold the ESC key to enter the flash mode. A u disk ’Boot‘ will show out. Copy and paste the firmware files into it, the keyboard will automatically flashed.

（图1）

焊接之前请务必先测试PCB（包括灯板），确保没有问题后再进行焊接；Test the PCB before soldering it. (Including the led pcb) Make sure eveything is work.

如果有些键无法被识别，请调整这些键位的键值到一些常见按键，更新固件再尝试；If you find some keys cannot be used, plz update the firmware and try it again.